-
chaitanya.mehrotra
- Master | Next Rank: 500 Posts
- Posts: 184
- Joined: Thu Nov 25, 2010 9:57 pm
- Thanked: 1 times
- Followed by:5 members
- GMAT Score:700
Despite their acronymic similarity, LEDs and LCDs represent distinct display technologies. In LEDs, or light-emitting diodes, two different semiconductor materials are layered together: n-type, in which mobile electrons carry negative charge, and p-type, in which "holes" in an otherwise bound sea of electrons carry positive charge. When electric current flows through the p-n junction between layers, an n-type electron falling into a p-type hole releases a photon, a specifically colored particle of light.
The dominant technology currently used in most consumer product displays is the active matrix liquid crystal diode display (LCD). LCDs apply thin-film transistors (TFTs) of amorphous silicon sandwiched between two glass plates. The TFTs supply voltage to liquid-crystal-filled cells, or pixels, between the sheets of glass. Liquid crystals can twist the polarization, or wave orientation, of light. Just as a guitar string can vibrate sideways or up and down, so a light wave can be polarized horizontally or vertically. Polarizing filters act as selective gates, transmitting light polarized one way but not the other. Within a pixel, liquid crystals in their relaxed, coiled state rotate the polarization of ambient light enough to make surrounding filters transparent. Alternatively, applied electrical signals uncoil the crystals, causing the filters to block light and the pixel to become opaque. LCDs that are capable of producing color images, such as in televisions and computers, reproduce colors by blocking out particular color wavelengths from the spectrum of white light until only the desired color remains. The variation of the intensity of light permitted to pass through the matrix of liquid crystals enables LCD displays to present images full of gradations of different colors.
The amount of power required to untwist the crystals to display images is much lower than that required for analogous processes using other technologies, such as plasma. The dense array of crystals displays images from computer sources extremely well, with full color detail, no flicker, and no screen burn-in. Moreover, the number of pixels per square inch on an LCD is typically higher than that for other display technologies; LCD monitors are excellent at displaying large amounts of data with exceptional clarity and precision.
The author uses the word 'otherwise' (line 8) primarily in order to
a)emphasize that the holes themselves are mobile
b)contrast mobile electrons in n-type material with bound electrons in p-type material
c)distinguish between negative and positive charge
d)establish the similarity between charge carriers in n- and p-type semiconductors
e)foreshadow the result of the electron-hole encounter at the p-n junction
OA after some discussion
The dominant technology currently used in most consumer product displays is the active matrix liquid crystal diode display (LCD). LCDs apply thin-film transistors (TFTs) of amorphous silicon sandwiched between two glass plates. The TFTs supply voltage to liquid-crystal-filled cells, or pixels, between the sheets of glass. Liquid crystals can twist the polarization, or wave orientation, of light. Just as a guitar string can vibrate sideways or up and down, so a light wave can be polarized horizontally or vertically. Polarizing filters act as selective gates, transmitting light polarized one way but not the other. Within a pixel, liquid crystals in their relaxed, coiled state rotate the polarization of ambient light enough to make surrounding filters transparent. Alternatively, applied electrical signals uncoil the crystals, causing the filters to block light and the pixel to become opaque. LCDs that are capable of producing color images, such as in televisions and computers, reproduce colors by blocking out particular color wavelengths from the spectrum of white light until only the desired color remains. The variation of the intensity of light permitted to pass through the matrix of liquid crystals enables LCD displays to present images full of gradations of different colors.
The amount of power required to untwist the crystals to display images is much lower than that required for analogous processes using other technologies, such as plasma. The dense array of crystals displays images from computer sources extremely well, with full color detail, no flicker, and no screen burn-in. Moreover, the number of pixels per square inch on an LCD is typically higher than that for other display technologies; LCD monitors are excellent at displaying large amounts of data with exceptional clarity and precision.
The author uses the word 'otherwise' (line 8) primarily in order to
a)emphasize that the holes themselves are mobile
b)contrast mobile electrons in n-type material with bound electrons in p-type material
c)distinguish between negative and positive charge
d)establish the similarity between charge carriers in n- and p-type semiconductors
e)foreshadow the result of the electron-hole encounter at the p-n junction
OA after some discussion
