BREAKING: Target Test Prep releases Brand New 2026 On Demand GMAT prep course

Redeem

Semi-circle problem

This topic has expert replies
Post new topic Post Reply
Previous Topic Next Topic
Master | Next Rank: 500 Posts
Posts: 458
Joined: Sun Aug 31, 2008 10:44 am
Thanked: 3 times
Followed by:1 members

Semi-circle problem

by gmat009 » Tue Oct 07, 2008 11:26 am
The figure above[see attached figure] shows the dimensions of a semicircular cross section of a one-way tunnel. The single traffic lane is 12 feet wide and is equidistant from the sides of the tunnel. If vehicles must clear the top of the tunnel by at least ½ foot when they are inside the traffic lane, what should be the limit on the height of vehicles that are allowed to use the tunnel?

A. 5½ ft
B. 7½ ft
C. 8 ½ ft
D. 9½ ft
E. 10 ft
Attachments
semi-circle.doc
(28.5 KiB) Downloaded 277 times
Top
Source: — Problem Solving |
Master | Next Rank: 500 Posts
Posts: 377
Joined: Wed Sep 03, 2008 9:30 am
Thanked: 15 times
Followed by:2 members

by schumi_gmat » Tue Oct 07, 2008 11:47 am
IMO B

whats the OA
Top
Master | Next Rank: 500 Posts
Posts: 458
Joined: Sun Aug 31, 2008 10:44 am
Thanked: 3 times
Followed by:1 members

by gmat009 » Tue Oct 07, 2008 11:57 am
Oa is B. Can you explain
Top
Master | Next Rank: 500 Posts
Posts: 377
Joined: Wed Sep 03, 2008 9:30 am
Thanked: 15 times
Followed by:2 members

by schumi_gmat » Tue Oct 07, 2008 12:02 pm
Let O be the center and draw perpendicular from the edges of rectangle 12feet wide.

then create 2 right triangles whic will the radius 10 feet.

Hence the length is 8ft = sqrt(100-36)

subtract 1/2 feet and hence the answer
Top
Legendary Member
Posts: 833
Joined: Mon Aug 04, 2008 1:56 am
Thanked: 13 times

by vivek.kapoor83 » Tue Oct 07, 2008 12:06 pm
cn u explain it a bit...its not clear
Top
Master | Next Rank: 500 Posts
Posts: 377
Joined: Wed Sep 03, 2008 9:30 am
Thanked: 15 times
Followed by:2 members

by schumi_gmat » Tue Oct 07, 2008 12:59 pm
attached is the diagram.

I hope this will help. The radius is 10ft and the breadth of highway is 12 ft which is divided into 6ft each.
Attachments
semi-circle.doc
(28.5 KiB) Downloaded 379 times
Top
Master | Next Rank: 500 Posts
Posts: 140
Joined: Sat Feb 28, 2009 8:51 am
Location: India
Thanked: 14 times
Followed by:3 members

by farooq » Sun Dec 13, 2009 11:35 am
schumi_gmat wrote:attached is the diagram.

I hope this will help. The radius is 10ft and the breadth of highway is 12 ft which is divided into 6ft each.
I marked A :(

Thanks a lot for your invaluable contribution.
Attachments
img1.JPG
Regards,
Farooq Farooqui.
London. UK

It is your Attitude, not your Aptitude, that determines your Altitude.
Top
Junior | Next Rank: 30 Posts
Posts: 11
Joined: Sun Apr 17, 2011 3:48 pm

by gmatisgay » Thu May 26, 2011 12:22 pm
thanks, the diagram certainly helped
Top
User avatar
Senior | Next Rank: 100 Posts
Posts: 94
Joined: Fri Jan 14, 2011 7:44 pm
Location: Bangalore, India
Thanked: 2 times
Followed by:5 members

by amar66 » Thu May 26, 2011 12:58 pm
Thanks. The diagram has really helped a lot.
Top
Junior | Next Rank: 30 Posts
Posts: 29
Joined: Mon Jul 11, 2011 1:09 am
Thanked: 1 times

by gmatIntent » Thu Nov 10, 2011 2:08 am
Why are we considering only the line perperndicular to X? Why not another line can be 3 feet away from both sides of the traffic lane?

What am I doing wrong?

Refer attached diagram.
Attachments
tunnel.JPG
Top
Legendary Member
Posts: 966
Joined: Sat Jan 02, 2010 8:06 am
Thanked: 230 times
Followed by:21 members

by shankar.ashwin » Thu Nov 10, 2011 2:18 am
Since each lane is 6 feet wide, we need to consider the shortest possible distance, imagine if a vehicle were to pass at the extreme left end of the lane for the figure you have drawn, it obviously violates the height clearance, if it asked for the maximum possible height we could just take the radius and subtract 1 feet for clearance getting 9. But then thats not what they ask.
gmatIntent wrote:Why are we considering only the line perperndicular to X? Why not another line can be 3 feet away from both sides of the traffic lane?

What am I doing wrong?

Refer attached diagram.
Top
Junior | Next Rank: 30 Posts
Posts: 29
Joined: Mon Jul 11, 2011 1:09 am
Thanked: 1 times

by gmatIntent » Thu Nov 10, 2011 2:23 am
shankar.ashwin wrote:Since each lane is 6 feet wide, we need to consider the shortest possible distance, imagine if a vehicle were to pass at the extreme left end of the lane for the figure you have drawn, it obviously violates the height clearance, if it asked for the maximum possible height we could just take the radius and subtract 1 feet for clearance getting 9. But then thats not what they ask.
gmatIntent wrote:Why are we considering only the line perperndicular to X? Why not another line can be 3 feet away from both sides of the traffic lane?

What am I doing wrong?

Refer attached diagram.
I'm sorry. I don't understand your explanation. Can you elaborate further please?

The question says 'what should be the limit on the height of vehicles that are allowed to use the tunnel'. So it should be maximum possible height. right?
Top
Legendary Member
Posts: 966
Joined: Sat Jan 02, 2010 8:06 am
Thanked: 230 times
Followed by:21 members

by shankar.ashwin » Thu Nov 10, 2011 2:33 am
Since you have drawn 2 cases here, let us use Case 2 as an example,

If you said height permitted can be 9.5-1 = 8.5.

Imagine a vehicle with height 8.5 travelled at the left extreme of the road (as drawn in Case 1), the height permitted would be only 8, if a vehicle with height 8.5 travels, it violates the design.

To avoid that, we calculate the distance at the left extreme (as in Case 1) and that would be considering vehicles travel along the full width of the road. Makes sense?


gmatIntent wrote: I'm sorry. I don't understand your explanation. Can you elaborate further please?

The question says 'what should be the limit on the height of vehicles that are allowed to use the tunnel'. So it should be maximum possible height. right?
Top
Junior | Next Rank: 30 Posts
Posts: 29
Joined: Mon Jul 11, 2011 1:09 am
Thanked: 1 times

by gmatIntent » Thu Nov 10, 2011 3:55 am
shankar.ashwin wrote:Since you have drawn 2 cases here, let us use Case 2 as an example,

If you said height permitted can be 9.5-1 = 8.5.

Imagine a vehicle with height 8.5 travelled at the left extreme of the road (as drawn in Case 1), the height permitted would be only 8, if a vehicle with height 8.5 travels, it violates the design.

To avoid that, we calculate the distance at the left extreme (as in Case 1) and that would be considering vehicles travel along the full width of the road. Makes sense?


gmatIntent wrote: I'm sorry. I don't understand your explanation. Can you elaborate further please?

The question says 'what should be the limit on the height of vehicles that are allowed to use the tunnel'. So it should be maximum possible height. right?
Thanks. I get your point.
But the vehicle not necessarily has to travel at the left & right edge of the lane. It can leave space of 3 feet at both the end of the lanes to cover more height. Isn't it?
Top
Legendary Member
Posts: 966
Joined: Sat Jan 02, 2010 8:06 am
Thanked: 230 times
Followed by:21 members

by shankar.ashwin » Thu Nov 10, 2011 4:09 am
Don't get confused by the wording, just consider the vehicle itself to be 12 feet wide, and find the height in that case (basically inscribing a rectangle inside the semi-circle)
gmatIntent wrote:
Thanks. I get your point.
But the vehicle not necessarily has to travel at the left & right edge of the lane. It can leave space of 3 feet at both the end of the lanes to cover more height. Isn't it?
Top
Post new topic Post Reply