-
Target Test Prep 20% Off Flash Sale is on! Code: FLASH20
Redeem
Breaking Down a GMATPrep Rate Problem
This week, were going to tackle a challenging GMATPrep problem solving question from the topic of Rates & Work.
Lets start with the problem. Set your timer for 2 minutes. and GO!
*Circular gears P and Q start rotating at the same time at constant speeds. Gear P makes 10 revolutions per minute, and gear Q makes 40 revolutions per minute. How many seconds after the gears start rotating will gear Q have made exactly 6 more revolutions than gear P?(A) 6
(B) 8
(C) 10
(D) 12
(E) 15
Given info about two different gears, P and Q, we have to figure out something about how quickly they move relative to each other. In particular, were supposed to figure out when this is true: (# of Gear Q revolutions) = (# of Gear P revolutions) + 6.
Quick Quiz: Name something critical that you MUST do on a problem solving question after reading the question but before starting to write down information or solve the problem.
Brainstorm a little bit. There are multiple good answers to the quiz, but Im looking for one in particular, so come up with a few ideas to see if you can hit the one that I want.
Heres the answer: Its critical to look at the answer choices before starting to solve. Why? Because the answer choices can actually help you decide the best way to solve the problem. In this problem, when I glanced at the answers, I immediately noticed that they were small, whole numbers. Great! I could actually test some of the answers to help me solve. I might start with the lowest number or I might start with one of the middle numbers Im not sure about that until I get a bit further into the problem.
Back to the problem. Before we dive in, a word of advice: I strongly recommend drawing out what is happening. Draw two little circles for gears, label them and write the rates in. Draw a timeline that shows, with tick marks, when each one completes a full revolution, and so on. Make rate or work problems as visual and concrete as you can.
Okay, now that youve done that, you also noted that the first sentence gives us the rates in revolutions per minute, while the second sentence asks us to calculate something in seconds, right?. Were going to have to do some conversions in order to solve, so lets start there.
The answer choices are represented in seconds, so we could convert those to minutes; that would involve converting five numbers and those numbers would all be fractions. Thats kind of annoying. Alternatively, the problem contains two rates that are given in terms of revolutions per minute. Converting two is easier than converting five, so lets convert the numbers in the problem.
Next, what do we want to convert to? Do we need to know the rate in terms of revolutions per second? Or do we want to know how many seconds it takes for each gear to rotate once?
Remember that timeline we drew earlier? We want something that we could just add to that timeline; that is, we could start drawing tick marks for Gear P and say, okay, after x seconds, it has rotated once, and then after 2x seconds, it has rotated twice, and so on. Its often a lot easier to do rate problems this way, especially because its so easy to make a mistake with the algebra. So Im going to start with figuring out how many seconds it takes for each gear to rotate once.
Gear Qs rate is 40 revolutions per 60 seconds. 60 seconds / 40 revolutions = 6/4 = 3/2 = 1.5 seconds for one revolution. After 1.5 seconds, Gear Q has rotated once. After 3 seconds, Gear Q has rotated twice.
Gear Ps rate is 10 revolutions per minute. There are 60 seconds in a minute, so it rotates 10 times in 60 seconds. 60 seconds / 10 revolutions = 6 seconds for one revolution. Okay, so after 6 seconds, Gear P has rotated once. After 12 seconds, it has rotated twice.
From here, Im going to give you two different ways to finish this problem off. The long way is up first:
Hmm. Those two numbers, 6 and 12, are jogging my memory. Those are two of the answer choices! Earlier, I noted that it would be easy to try the answer choices in the problem because theyre small integers. Lets try 6 and 12.
I already know that Gear P will have rotated once after 6 seconds and twice after 12. What about Gear Q? After 6 seconds, Gear Q will have rotated 6/1.5 = 4 times. Okay, so once and four times does that fit the question? (When will Gear Q have rotated 6 more times than Gear P?) Nope. Cross off A.
After 12 seconds, Gear Q will have rotated 12/1.5 = 8 times. Gear P will have rotated twice at this point. Does this fit the question? Yes! 8 = 2+6! Gear Q has rotated 6 more times than Gear P. We didnt even have to use algebra or write any complicated equations (and, yes, this was the long way).
Heres the short way: if you did draw out a timeline as I suggested earlier, start placing tick marks on your timeline, every 6 seconds for Gear P and every 1.5 seconds for Gear Q. Wherever they overlap (12, in this case!) is our answer. (Note that you already know you wont have to extend the timeline very far to find the overlap because the largest number in the answer choices is 15. If the largest number had been 145, then the longer way, above, might be a better bet.)
The correct answer is D.
Key Takeaways for Problem Solving Rate Problems:
- Determine that you have a rate (or work) problem: this occurs when some type of rate is discussed, possibly a rate for the movement of some object or possibly a rate for an amount of work that is completed.
- Before you start solving, glance at the answer choices for all problem solving problems. Does the format give you any clues about possible solution methods? If the answers consist of small, whole numbers, you can probably use them to help you solve. (If the numbers are very spread out, you can probably estimate. If there are variable expressions in the choices, you can try your own numbers. And so on!)
- Imagine youre in the actual situation and draw it out. Make a number line: a timeline or a representation of distance (say, a 100-mile train track) and, if theres more than one thing moving or doing work, put them both on that same number line. Draw tick marks and step through the problem: after 1 hour, this is where each train is on the 100-mile track; after two hours, this is where each one is; and so on.
- As always, write out all of your work and, when studying, analyze your work. Even when you answer correctly, there may still be an easier or more efficient way to do the problem!
* GMATPrep questions courtesy of the Graduate Management Admissions Council. Usage of this question does not imply endorsement by GMAC.
Recent Articles
Archive
- May 2024
- April 2024
- March 2024
- February 2024
- January 2024
- December 2023
- November 2023
- October 2023
- September 2023
- July 2023
- June 2023
- May 2023
- April 2023
- March 2023
- February 2023
- January 2023
- December 2022
- November 2022
- October 2022
- September 2022
- August 2022
- July 2022
- June 2022
- May 2022
- April 2022
- March 2022
- February 2022
- January 2022
- December 2021
- November 2021
- October 2021
- September 2021
- August 2021
- July 2021
- June 2021
- May 2021
- April 2021
- March 2021
- February 2021
- January 2021
- December 2020
- November 2020
- October 2020
- September 2020
- August 2020
- July 2020
- June 2020
- May 2020
- April 2020
- March 2020
- February 2020
- January 2020
- December 2019
- November 2019
- October 2019
- September 2019
- August 2019
- July 2019
- June 2019
- May 2019
- April 2019
- March 2019
- February 2019
- January 2019
- December 2018
- November 2018
- October 2018
- September 2018
- August 2018
- July 2018
- June 2018
- May 2018
- April 2018
- March 2018
- February 2018
- January 2018
- December 2017
- November 2017
- October 2017
- September 2017
- August 2017
- July 2017
- June 2017
- May 2017
- April 2017
- March 2017
- February 2017
- January 2017
- December 2016
- November 2016
- October 2016
- September 2016
- August 2016
- July 2016
- June 2016
- May 2016
- April 2016
- March 2016
- February 2016
- January 2016
- December 2015
- November 2015
- October 2015
- September 2015
- August 2015
- July 2015
- June 2015
- May 2015
- April 2015
- March 2015
- February 2015
- January 2015
- December 2014
- November 2014
- October 2014
- September 2014
- August 2014
- July 2014
- June 2014
- May 2014
- April 2014
- March 2014
- February 2014
- January 2014
- December 2013
- November 2013
- October 2013
- September 2013
- August 2013
- July 2013
- June 2013
- May 2013
- April 2013
- March 2013
- February 2013
- January 2013
- December 2012
- November 2012
- October 2012
- September 2012
- August 2012
- July 2012
- June 2012
- May 2012
- April 2012
- March 2012
- February 2012
- January 2012
- December 2011
- November 2011
- October 2011
- September 2011
- August 2011
- July 2011
- June 2011
- May 2011
- April 2011
- March 2011
- February 2011
- January 2011
- December 2010
- November 2010
- October 2010
- September 2010
- August 2010
- July 2010
- June 2010
- May 2010
- April 2010
- March 2010
- February 2010
- January 2010
- December 2009
- November 2009
- October 2009
- September 2009
- August 2009